Print Page | Close Window

Custom Vinyl Stickers

Printed From: Puget Sound MINI Motoring Club
Category: Technical Discussions
Forum Name: Interior and Exterior Modifications
Forum Description: Post your interior and exterior modifications here or post questions about mods.
URL: http://www.psmini.org/forum/forum_posts.asp?TID=8993
Printed Date: March/29/24 at 2:01am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Custom Vinyl Stickers
Posted By: Cobalt
Subject: Custom Vinyl Stickers
Date Posted: March/27/12 at 10:10pm
I am thinking it would be fun to add a little more pizazz to my rear windows in the form of some custom vinyl stickers based on something I have drawn.  Does anyone know of a place (be it a shop in the greater Seattle area or a website) where you can order custom designed vinyls?
 
Thanks in advance for any replies Drive


-------------
Cobalt - 2008 MCS Lightning Blue/Silver, JCW Suspension & intake, OZ Ultraleggera wheels, NM Eng strut brace & SS brake lines, Black Jack mirror caps & sunroof graphic, custom Black Jack side vinyls.



Replies:
Posted By: CORNERS
Date Posted: March/27/12 at 10:15pm
I know it is a really simple design, but I ordered the "01" stickers on my MINI from a place called Squier Design. I just showed them a photo of what I wanted and they created it for me. 

http://www.squierdesign.com" rel="nofollow - http://www.squierdesign.com




-------------

Kurt/04 R53 http://youtube.com/user/khammo01" rel="nofollow - Check out My MOD MINI repair videos channel @ YouTube


Posted By: Wildfamily
Date Posted: March/28/12 at 7:38am
I got some really nice vinyl done for my racecar by HarrisDecals.com. Check them out. They will email you a proof to view before it's final so you can revise as many times as you need. http://harrisdecals.com/" rel="nofollow - http://harrisdecals.com/

-------------
'15 F55 Cooper Volcanic Orange
'80 Mini English White


Posted By: TimC
Date Posted: April/01/12 at 10:28am
I know of a place! me :D 
I can have anything printed on 3M printed vinyl, or even perferated vinyl for back windows.
we can do full vinyl wraps too.




-------------
2007 - Oxy Blue Mini Cooper

1998 - Brooklands Green Mini Cooper

1997 - Charcoal Rover Mini Cooper



Posted By: Sanderskog
Date Posted: April/01/12 at 3:45pm
Tell me more!  I have some ideas for my car and am looking for someone to do the work.

-------------
2012 VW Golf Pirate Edition... Aarrr! - JACK

Speed has never killed anyone, suddenly becoming stationary… that’s what gets you. – Jeremy Clarkson
LIVESTRONG


Posted By: DneprDave
Date Posted: April/01/12 at 5:53pm
FastSigns will put anything you want on a vinyl sticker.

They are a national chain, but each shop is locally owned.

http://www.fastsigns.com/metro/qs/seattle" rel="nofollow - http://www.fastsigns.com/metro/qs/seattle

The Olympia store made the Union Jack for my sunroof.

Dave


-------------
Chili red/ Black roof 2010 Clubman S automatic transmission.



Shadetree mechanic


Posted By: johnf36
Date Posted: April/01/12 at 6:59pm
Todd, Tim just opened a new shop

-------------
If everything seems under control, you're just not going fast enough.



Posted By: Sanderskog
Date Posted: April/01/12 at 8:34pm
I shot him a PM as well John.  I also got the name of the guy that Seattle MINI uses.  I have an idea for the roof and want to see if I can pull it off.

-------------
2012 VW Golf Pirate Edition... Aarrr! - JACK

Speed has never killed anyone, suddenly becoming stationary… that’s what gets you. – Jeremy Clarkson
LIVESTRONG


Posted By: johnf36
Date Posted: April/01/12 at 11:17pm
Cool sounds like you have a plain.

-------------
If everything seems under control, you're just not going fast enough.



Posted By: Cobalt
Date Posted: April/01/12 at 11:44pm

Thank you all for the replies!  Sanderskog can you PM me the details about the guy Seattle MINI uses?  TimC, congrats on starting the new business!  Do you have a website set up yet that I could browse?

My idea has evolved since its initial conception but I am going to need to get some opinions from people who work with vinyls to see if it is feasible.  As it stands, I would like to wrap a portion of both rear quarterpanels with a matching design that would bleed partially into the rear windows (though not so much that it would obstruct my over the shoulder view).  I will try and post some previsualizations of how I want it to look using my limited photo editing software (aka MS paint Ermm)...


-------------
Cobalt - 2008 MCS Lightning Blue/Silver, JCW Suspension & intake, OZ Ultraleggera wheels, NM Eng strut brace & SS brake lines, Black Jack mirror caps & sunroof graphic, custom Black Jack side vinyls.


Posted By: johnf36
Date Posted: April/02/12 at 10:23am
Cobalt
are you looking for something like this?


The guy that Seattle uses is out in Maple Valley and does full wraps like the Orange one at Seattle.  Tim is a Mini owner and has done a lot of bras, custom tints and vinyl.


-------------
If everything seems under control, you're just not going fast enough.



Posted By: Cobalt
Date Posted: April/02/12 at 11:46am

Very cool picture John!  The general concept of the location of the grapics on that coupe are very similar to what I am now seeking to achieve.  I have attached my own previsualization of the design I would like to implement below. 

I need to work out a way to implement some of the shading details on the printed graphic to make it seem three dimensional in some areas and I am still not sure if I want to do a silver color to match my silver stripes and Black Jack graphic or if I want to do a slightly darker blue so the graphic is essentially a ghosted image.  Of course, the most basic question would be if this idea is even feasible.
 
 
Thoughts anyone?

-------------
Cobalt - 2008 MCS Lightning Blue/Silver, JCW Suspension & intake, OZ Ultraleggera wheels, NM Eng strut brace & SS brake lines, Black Jack mirror caps & sunroof graphic, custom Black Jack side vinyls.


Posted By: Genie B
Date Posted: April/03/12 at 12:31pm
Very cool design and placement Thumbs Up
 


-------------


Posted By: johnf36
Date Posted: April/03/12 at 1:18pm
Look cool, that should be able to be done, only thing is the trim piece at the base of the window.

-------------
If everything seems under control, you're just not going fast enough.



Posted By: Cobalt
Date Posted: April/03/12 at 10:40pm
Very good point, John.  Since I like the trim pieces I will probably have the graphic cut so it will appear on either side.  The points and angles at the upper right end of the design will likely not be as close to the belt line as shown since my representation does not account for the curve of the rear body panel.

-------------
Cobalt - 2008 MCS Lightning Blue/Silver, JCW Suspension & intake, OZ Ultraleggera wheels, NM Eng strut brace & SS brake lines, Black Jack mirror caps & sunroof graphic, custom Black Jack side vinyls.


Posted By: TimC
Date Posted: April/03/12 at 11:37pm
I can do almost any graphic and have it printed. I'm trying to get featured for PSMINI soon as a vendor and give everyone a 15% off discount. Our website is www.autoarmornw.com




-------------
2007 - Oxy Blue Mini Cooper

1998 - Brooklands Green Mini Cooper

1997 - Charcoal Rover Mini Cooper



Posted By: johnf36
Date Posted: April/03/12 at 11:53pm
Tim did you talk to Linda ?

Cobalt you might consider blacking out your boot top and then letting someone like Time work with it in 2 pieces.

This is the Link right?
http://autoarmornw.com/" rel="nofollow - http://autoarmornw.com/


-------------
If everything seems under control, you're just not going fast enough.



Posted By: Sanderskog
Date Posted: April/04/12 at 8:30am
Originally posted by TimC TimC wrote:

I can do almost any graphic and have it printed. I'm trying to get featured for PSMINI soon as a vendor and give everyone a 15% off discount. Our website is www.autoarmornw.com




So I should sit on all that work I emailed to you then? Wink

Todd


-------------
2012 VW Golf Pirate Edition... Aarrr! - JACK

Speed has never killed anyone, suddenly becoming stationary… that’s what gets you. – Jeremy Clarkson
LIVESTRONG


Posted By: TimC
Date Posted: April/04/12 at 8:41pm
Once PSMINI gets me featured as a vendor I'd love to offer everyone the 15% off. I believe it is in the working as we speak. So by the time you're ready to have the work done you will get the deal :D

and yes John, that is the correct link to our website. 


http://www.autoarmornw.com" rel="nofollow - www.autoarmornw.com



-------------
2007 - Oxy Blue Mini Cooper

1998 - Brooklands Green Mini Cooper

1997 - Charcoal Rover Mini Cooper



Posted By: johnf36
Date Posted: April/04/12 at 9:07pm
Tim do you have DYI kits for the head and tail light kits?

-------------
If everything seems under control, you're just not going fast enough.



Posted By: CORNERS
Date Posted: April/04/12 at 9:23pm
Hi Tim. I've had a word with Linda. Please PM me so we can take this discussion offline and I can help to get you set up as a featured vendor! 



-------------

Kurt/04 R53 http://youtube.com/user/khammo01" rel="nofollow - Check out My MOD MINI repair videos channel @ YouTube


Posted By: TimC
Date Posted: April/08/12 at 1:53pm

this is the banner that I came up with. its animated.. hope it works on this forum.
what do you think? 15% good?  I was thinking we could offer a slightly better rate on paint protection full kit installs if there was enough interest for 4+ minis. Maybe offer 20% off? anyone think there would be enough interest for this?

-Tim


-------------
2007 - Oxy Blue Mini Cooper

1998 - Brooklands Green Mini Cooper

1997 - Charcoal Rover Mini Cooper



Posted By: TimC
Date Posted: April/08/12 at 1:55pm
http://autoarmornw.com/wp-content/uploads/2012/04/autoarmorbanner.gif" rel="nofollow - http://autoarmornw.com/wp-content/uploads/2012/04/autoarmorbanner.gif

actually here is a link to the banner...some reason the forum doesn't like animated gifs.

:/




-------------
2007 - Oxy Blue Mini Cooper

1998 - Brooklands Green Mini Cooper

1997 - Charcoal Rover Mini Cooper



Posted By: italianjob
Date Posted: April/13/12 at 3:55pm
well it s not in seattle, not in the US but they have a huge selection and they ship  worldwide:

http://www.mini-graphics.co.uk/about-mini-graphics" rel="nofollow - http://www.mini-graphics.co.uk/about-mini-graphics


Stefano


-------------
(Italian Job) '03 MCS Indie Blue SOLD :'(

(Polpetta) 2008 MClubman S Sitting on Sparco Assetto Gara Wheels

2013 GP

"I killed the clown and took his car"


Posted By: johnf36
Date Posted: April/13/12 at 6:03pm
Nice find Stefano

-------------
If everything seems under control, you're just not going fast enough.



Posted By: VicThrust
Date Posted: October/13/15 at 5:13pm
I used http://FireStormGraphix.com" rel="nofollow - FireStormGraphix.com  to create a custom set of bonnet and boot stripes on my 2006 S Convertible. They printed a repeating a gloss black skull pattern onto matte black vinyl. The came out awesome. Sara was wonderful to work with.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net